01-29-2014 02:35 PM - edited 03-19-2019 07:49 AM
Hello,
CIPC softphone TFTP paged is disabled, i am not able to edit/manually put the TFTP server details.
I have tried with two different version of CICP
8.6.2
7.0.6
The problem remain the same. Please help!!!!
Regards
Rajeev
Solved! Go to Solution.
01-29-2014 02:39 PM
Can you please try check this changing with other PC/Laptop ?
also try run the CIPC with as "Run as Administrator" then check are you able to see the same or not?
Br,
Nadeem
Please rate all useful post.
01-30-2014 06:11 AM
You can refer to Rls notes here what it says.
http://www.cisco.com/en/US/docs/voice_ip_comm/cipc/7_0/english/release/notes/CIPC70_RN.html#wp101946
In Windows 7 and Vista, users by default do not invoke applications with administrator privileges even if the user is an administrator. Refer to Microsoft UAC functionality for reference. The network preference settings in Cisco IP Communicator is one functional area that requires this elevated privilege.
In Release 7.0.4, users with administrator privileges and UAC enabled must right-click and select Run As Administrator to change Cisco IP Communicator network settings. You can also disable UAC entirely.
Br,
Nadeem
Please rate all useful post.
01-29-2014 02:39 PM
Can you please try check this changing with other PC/Laptop ?
also try run the CIPC with as "Run as Administrator" then check are you able to see the same or not?
Br,
Nadeem
Please rate all useful post.
01-30-2014 06:08 AM
Thanks, it worked.
Do you why it worked while running through as administrator but not normal way.
Thanks..Nadeem
01-30-2014 06:11 AM
You can refer to Rls notes here what it says.
http://www.cisco.com/en/US/docs/voice_ip_comm/cipc/7_0/english/release/notes/CIPC70_RN.html#wp101946
In Windows 7 and Vista, users by default do not invoke applications with administrator privileges even if the user is an administrator. Refer to Microsoft UAC functionality for reference. The network preference settings in Cisco IP Communicator is one functional area that requires this elevated privilege.
In Release 7.0.4, users with administrator privileges and UAC enabled must right-click and select Run As Administrator to change Cisco IP Communicator network settings. You can also disable UAC entirely.
Br,
Nadeem
Please rate all useful post.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide