Cisco Jabber Guest

[aheredia05]

Hello Everyone, 

I Have a doubt about Jabber Guest server deployment.

We already have one Exp-Edge as MRA, and one Exp-Core.

Can The same Exp-Edge  works for MRA and Jabber Guest or Do we need another Exp-Edge?

The same question for the Exp-Core, Do I need more or The same may Works?

Thanks a lot for your help!

Regards.

[Manish Gogna · Accepted solution]

Hi,

The Expressway can not be used for Jabber Guest when it is used for MRA. This is mentioned in the MRA deployment guides like the one below ( page 41 )

http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/config_guide/X8-5/Mobile-Remote-Access-via-Expressway-Deployment-Guide-X8-5.pdf

Manish

[aheredia05]

Hello Manish

Thanks For your answer, 

It's clear to me now.

[vahidsun9]

hi dear  manish

TUX for answer

[vahidsun9]

dear all

how do you config Cisco  jabber guest , jabber (MRA) and integration cisco Expressway

PLZ help me

CUCM/CUP Version 10.5.1
Expressway Version 8.6.1 ( for Jabber Guest ) Not Okey

Expressway Version 8.6.1 ( for Jabber MRA ) Its Okey publish Internet
Cisco jabber guest 10.6.6.53

[Manish Gogna]

Hi,

Based on your Expressway, Jabber Guest and cucm versions mentioned you need to follow the install guides below

http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/config_guide/X8-6/Mobile-Remote-Access-via-Expressway-Deployment-Guide-X8-6.pdf

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/Guest/10_6/icg/JABC_BK_JF2738FB_00_jabber-guest-server-106-installation.html

However, as mentioned in the MRA deployment guide "The Expressway cannot be used for Jabber Guest when it is used for MRA."

HTH

Manish

[vahidsun9]

we need using jaber MRA & jaber Guest Simultaneously in our company , meanwhile since there is 2 expressway-E for each jabber ( MRA and guest ) the issue is that which DNS records should be defined after publishing in internet

• it is neccesary to mention we must use both MRA & guest in internet Simultaneously