cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1187
Views
0
Helpful
6
Replies
Highlighted
Beginner

Cisco Meetingplace 8 License problem

Hi

I have a problem

after i have installed Cisco Meetingplace 8 on 7835 I3 server i want to install our License file into the server

but i cannot start Cisco License manager server it gives me this error

Starting Meetingplace License Manager : [Warning] Starting Meetingplace Manager : require dependencies not satisfied. License file not found at path: /opt/cisco/meetinfplace/licenses/license,dat

Mettingplace Lisence manager is stopped

So please help me to solve this Error and to install the License file

Thanks

6 REPLIES 6
Highlighted
Beginner

hey guys,

Any Reply

Highlighted

Hi,

Can you please check if the DNS is working fine ? I remember having a case where we were not able to start the license manager because license manager was not to resolve the hostname of the server.

If it is working fine, can you please upload the license manager and infocap logs or otherwise open a TAC case.

-Atul

Please rate, if this helps!!

Highlighted

Hi

DNS is working fine but i caanot restart the license manager service

when the service is restart it gives me this Warning

Starting MeetingPlace License Manager: [WARNING]

    required dependencies not satisfied.

    License file not found at path: /opt/cisco/meetingplace/licenses/license.dat

When i enter checklic command it gives me this response

no License file present - /opt/cisco/meetingplace/licenses/license.dat. Using Defaults.

********

License Summary:

   Voice    =   6; raw # =   0;   MaxVoice =   6; raw # =   0;   Web       =   6; raw # =   0;   MaxWeb   =   6; raw # =   0;   Video      =   6;  raw # =   0;   HD Video      =   0; raw # =   0;   MaxVideo   =   6; raw  # =   0;   MaxAdhoc =   6; raw # =   0;  MaxStd =   6; raw # =   0;   StdVoiceConf =   6; raw # =   0;  StdVideoConf =   6; raw # =   0;   StdVoiceUpg =   0;  StdVideoUpg =   0;  SecondaryServers =   0;   Languages=   0; raw # =   0;  Exchange =   0; raw # =   0;  Jabber =    0;  LiveMeeting =   0;  Lcs =   0;  MsftInt =   0;  Notes =   0;   VideoRecording =   0;********

CPSERVER - cicm : Mode - 0.

StdVoiceConf is 0 : StdVideoConf is 0

SchedVoiceConf is 6

Using trial web conference licenses.

Highlighted

Hi,

Try to restart the service once again, gather the infocap for 5mins and upload it please.

-Atul

Please rate, if this helps!!

Highlighted

HI,

I tried to restart the service but it gives me the same error

 
license manager: can't initialize: No SERVER lines in license file
License path:  /opt/cisco/meetingplace/licenses/license.dat
FLEXlm error:  -13,66
For further information, refer to the FLEXlm End User Manual,
available at "www.macrovision.com".
license manager: can't initialize: No SERVER lines in license file
License path:  /opt/cisco/meetingplace/licenses/license.dat
FLEXlm error:  -13,66
For further information, refer to the FLEXlm End User Manual,
available at "www.macrovision.com".
license manager: can't initialize: No SERVER lines in license file
License path:  /opt/cisco/meetingplace/licenses/license.dat
FLEXlm error:  -13,66
For further information, refer to the FLEXlm End User Manual,
available at "www.macrovision.com".
license manager: can't initialize: No SERVER lines in license file
License path:  /opt/cisco/meetingplace/licenses/license.dat
FLEXlm error:  -13,66
For further information, refer to the FLEXlm End User Manual,
available at "www.macrovision.com".
license manager: can't initialize: No SERVER lines in license file
License path:  /opt/cisco/meetingplace/licenses/license.dat
FLEXlm error:  -13,66
For further information, refer to the FLEXlm End User Manual,
available at "www.macrovision.com".
license manager: can't initialize: No SERVER lines in license file
License path:  /opt/cisco/meetingplace/licenses/license.dat
FLEXlm error:  -13,66
For further information, refer to the FLEXlm End User Manual,
available at "www.macrovision.com".
license manager: can't initialize: No SERVER lines in license file
License path:  /opt/cisco/meetingplace/licenses/license.dat
FLEXlm error:  -13,66
For further information, refer to the FLEXlm End User Manual,
available at "www.macrovision.com".
license manager: can't initialize: No SERVER lines in license file
License path:  /opt/cisco/meetingplace/licenses/license.dat
FLEXlm error:  -13,66
For further information, refer to the FLEXlm End User Manual,
available at "www.macrovision.com".
license manager: can't initialize: No SERVER lines in license file
License path:  /opt/cisco/meetingplace/licenses/license.dat
FLEXlm error:  -13,66
For further information, refer to the FLEXlm End User Manual,
available at "www.macrovision.com".
license manager: can't initialize: No SERVER lines in license file
License path:  /opt/cisco/meetingplace/licenses/license.dat
FLEXlm error:  -13,66
For further information, refer to the FLEXlm End User Manual,
available at "www.macrovision.com".

ED

Highlighted

Hi,

Please open a case with licensing team and ask them to reissue you the licenses.

-Atul

Please rate, if this helps!!

Content for Community-Ad