cisco operation manager

[abdullah alnahdi]

                   Hi all

I have installed cisco operation manager 2.2 in my network which include cucm, VG and switches. The operation manager is installed in windows server 2003. The problem is when i try to add for example the cucm it gave an error

(Cannot add device.
See the NMSROOT/log/CUOM/TIS/DeviceManagement.log file for more information)

I have configured the SNMP in cucm and also alarms...

also when i try to discover these switches and CUCM it gave error

(There are no devices in the inventory)

Can any one help me in this

Please

Regards

[ahmed mohamed noaman]

Hi abdulla

i hope you are fine today ,

first thing you must check  the connection between  your OM and devices you want to add it 

1- configure community string  in  all your network devices

2- cheking if you enable  SNMP service in your OM server

3-from OM server ping to your devices

4- download Snmpwalk for windows and install it in your OM server  after that run CMD

and write CD\  then CD snmpwalk  then write  this command   

snmpwalk  -v2c  (destination IP for VG or CUCM  )  (community string SNMP FOR  destination  )

if there is time out   you must check the SNMP community is correct or not  and if any firewall  block the connection

anf if it is working  please reply to me

[abdullah alnahdi]

Hi Ahmed

Thanks for your reply. I will try your suggestion and i will reply you soon. By the way where are you from.

HAVE A nice day

[ahmed mohamed noaman]

I'm waiting you reply