cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
537
Views
0
Helpful
3
Replies

Cisco Prime Collaboration Assurance Standard

hassanalirazi
Level 1
Level 1

Hi All,

We have recently deployed Cisco Prime Collaboration Assurance Standard Server. The issue that I am facing is that after some time the server collapses and logs me out, even though I can connect via the cli.

 

The version of prime we are using is : 10.5.1.53684.

 

I am attaching some logs that I got from the cli mostly related to apache.

Has someone faced this issue?


Thanks

Hassan

3 Replies 3

Aman Soi
VIP Alumni
VIP Alumni

HI Hassan,

 

I am not sure whether this bug is somewhat helpful or not .

 

NCS/PRIME - ActiveMQ update needed in XMP to 5.9.0
CSCui91261

 

Suggest opening TAC case.

regds,

aman

 
 

Hi Aman,

 

Thank you I will have a look at the bug. I was following the troubleshooting document and as compared to that document the service running when I do a sh application status cpcm are a lot less.

 

http://docwiki.cisco.com/wiki/Troubleshooting_Cisco_Prime_Collaboration#How_to_verify_the_Cisco_Prime_Collaboration_Assurance_installation_.28for_advanced_and_standard_modes.29.3F

 

STAT   PID USER     COMMAND             ELAPSED
===============================================
SNl   1119 root     emsam_perfmonen       12:50
S<l   1288 root     emsam_tomcat          12:39
SNl   1400 root     emsam_poller          12:16
SNl   1625 root     emsam_fault           11:56
S<l  32045 root     Decap_main            14:41
SN   32164 postgres postgres              14:40
SN   32274 primea   postmaster            14:29
SNl  32317 root     emsam_mq              14:12
SNl  32380 root     cpc_multiproclo       14:04
SNl  32414 root     emsam_inventory       14:04

 

Regards

Hassan

Hi Hassan,

 

Is the issue resolved?

 

regds,

aman

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: