Cisco Unified Server Proxy (CUSP)

[TexasBrandon]

I am trying to find some documentation that actually explains the setup of CUSP other than the cisco document that goes over each setting.  While that document is useful, I am confused as to how to set this up as the limited information is just that, limited.  Does anyone here have any sort of training manual or video going over the CUSP and what is needed to setup a gatekeeper style environment for SIP?  We want to centralize our call routing as we currently have four different CUBEs used for routing and our dial-peers have reached an astronimcal amount to the point that maintenance, configuration, and any sort of management has become a burden more than anything.  We currently process more than 200-300 some calls at any given point on any one of our CUBEs.  Thanks for any help.

[TexasBrandon]

Anyone?  I have a configuration set but I am unsure as to what is wrong.  This is an internal test at the moment on a test CUBE we have setup..

I get this SIP message when debugging from the CUBE as well as from the Proxy itself when viewing the errors:

May 30 2013 15:00:04.399 UTC: //55/9AA7F7800000/SIP/Msg/ccsipDisplayMsg:

Received:

SIP/2.0 404 no matching algorithm found

Via: SIP/2.0/UDP 10.1.10.2:5060;branch=z9hG4bK302206

To: <17032539049>;tag=dsdc6e5ea

From: <7032539088>;tag=96B7CB0-1D99

Call-ID: 71B297D6-C87011E2-809B9A3F-440EB235@10.1.10.2

CSeq: 101 INVITE

Content-Length: 0

[TexasBrandon]

Nevermind, I found the issue.  I wasn't applying the right prefix key.  It was 1703 instead of 703....

[sadswami]

Check below links:

https://www.youtube.com/watch?v=I4P0j_v3ONc

https://www.youtube.com/watch?v=p46zEgCetbY