06-24-2014 11:14 PM - edited 03-19-2019 08:19 AM
Hi All,
My customer is planning to upgrade their MS Exchange from 2010 to 2013. I need to check whether it is compatible with Cisco Unity 7.0(2). Unfortunately i couldnot find any compatibility matrix from Cisco. Can anyone help me please..
Solved! Go to Solution.
06-25-2014 06:29 AM
Hello,
Here is the compatibility matrix for Unity 7 -
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/unity/compatibility/matrix/cuclientmtx.html
I also know that Unity 7 is not supported with Exchange 2013 and is EOL.
Hope this helps
Tony
Please rate helpful posts
06-25-2014 06:29 AM
Hello,
Here is the compatibility matrix for Unity 7 -
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/unity/compatibility/matrix/cuclientmtx.html
I also know that Unity 7 is not supported with Exchange 2013 and is EOL.
Hope this helps
Tony
Please rate helpful posts
06-25-2014 09:14 PM
Hi Tony,
Thanks for the response.
I could not find the supported MS Exchange versions with Unity 7.0(2) in the above link. My customer need a proper document saying MS Exchange 2013 is not compatible with Unity 7.0(2) or a list of supported MS Exchange versions with Unity 7.0(2).
06-26-2014 04:07 AM
I am not sure if such a document exists. Every document I see pertaining to Unity 7 and 8 only show support up to Exchange 2010. You may have to just open a TAC case if the customer is wanting written proof.
Hope this helps
Tony
Please rate helpful posts
06-26-2014 06:47 AM
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/unity/7x/requirements/7xcusysreq.html#wp472166
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: