Cisco Unity Express - No Audio on Every 4th Message
Hi everyone! New to the site and pretty new to Cisco phone systems. I am supporting a Cisco Unity Express Ver. 3.1 system that has an odd problem and I cannot find the same problem anywhere so thought I would ask here. On every 4th call when you leave a message there is no audio. There is just dead air and the duration of silence is as long as you talked in the message. This happens with all calls internal and external. We have 12 ports and it is not port specific. For example port 602 is fine 3 out of 4 calls, but port 610 may be bad 2 out of 4 calls. The only pattern is every 4th call the message left is dead air when playing back from the phone and the email attachment. Any chance there is some magical checkbox out there that I need to check!?
Table of Contents:
1. Reference URLs
2. Type of Certificates
3. Regenerate certificates that have no CTL/ITL impact [no phone impact]
4. Regenerate certificates that have CTL/ITL impact [medium phone impact]
5. Step to delete expired certif...
I have been using the recent release of the WebEx Desktop App (39.9) which has Wireless Sharing feature. Prior to this, we were using the proximity application for sharing, where we can find the performance logs on the %temp% folder of the client machine....
Cisco Recommends Dual NIC deployment for Expressways. But single NIC deployment can be achieved. Points to be noted for single NIC: > Firewall must support NAT Reflection, if not then you can use dual NATing to achieve NAT reflection on unsup...
Learn how Cisco is transforming how you communicate in the modern workplace with new capabilities like expanded Webex calling, unified app experiences, and intelligent devices and tools.
Webex Unified Platform
Deep Dive Briefings