i have issue with ringback tone, we have the below scenario:
Telkom SIP --> Cisco VG --> SIP --> CUCM --> UCCX Trigger --> UCCX CTI Port (936305) ( till this point all is working fine) --> call redirect to CTI Route point (952019) ( ARC Operator console ) --> CTI Port 932026 (once the call is redirected to this number there is no ringtone back ), if i redirect the call from the script to the phone direct not 952019 i can hear ringback tone and the call is success, by the way the call at the end will establish but no ringtone once its redirected to 952019
I checked the CUBES logs and I saw once the call connected with 936305 all the signalling was 100% contain 180 ringing, but once the call redirect to 952019 then 932026 there is no 180 ringing message, CUBE logs in the attachment ( calling number: 0735377372) as sample.
i tried checked MTP on the Trunk, and changed the SIP Profile by disable media 180, Early offer....etc and still not working.
Les stations de radio en ligne sont devenues l'une des formes de partage des médias les plus populaires dans la ecouter radio en ligne société d'aujourd'hui. La radio Internet est maintenant disponible sur tous les principaux modems de câbles et sans fil ...
This document describes the details about the Cisco Collaboration Endpoint software upgrade error “File too large”, and guides through the possible workarounds to upgrade the endpoint to the desired version.
we have recently announced a new Webex Events service with a best-in-class virtual event experience that is video-centric, intelligent, and simple to use.
Some highlights (features of new Webex Events that were not there with existing/c...
The purpose of this document is to present the different troubleshooting steps to take when some service from the Cisco IM & Presence Service Server have not started gracefully.
The States of a service
The IM&P ...
This event had place on Tuesday 20th, April 2021 at 10hrs PDT
What is the Real-Time Monitoring Tool (RTMT) and how do I use it? In addition to an overview of the components of the tool and the interface, attendees learned how to use ...