we have two ccm clusters(each is having 2 servers).we have made one server of each cluster as the first node of that cluster i.e primary and the other is secondary.but when we unplug the primary from switch,secondary is not taking the phone load from primary.Is it requred to configure anything in service parameter or please suggest me what may be the problem..and what are the steps should I follow to make it possible for secondary to take the phone load from primary...
It depends on your callmanager group. if you did not configuration your CallManager Groups, and add the Subscriber into the group, then the phones will not fail over.
Do a quick test with a phone online, go into the settings and network configuration. Do you see you CCM 1 xxx.xxx.xxx and CM2 xxx.xxx.xxx? If you do not see CCM2, then you do not have your groups configuration correctly. The phones have no idea there is a second server in the cluster.
Table of Contents:
1. Reference URLs
2. Type of Certificates
3. Regenerate certificates that have no CTL/ITL impact [no phone impact]
4. Regenerate certificates that have CTL/ITL impact [medium phone impact]
5. Step to delete expired certif...
I have been using the recent release of the WebEx Desktop App (39.9) which has Wireless Sharing feature. Prior to this, we were using the proximity application for sharing, where we can find the performance logs on the %temp% folder of the client machine....
Cisco Recommends Dual NIC deployment for Expressways. But single NIC deployment can be achieved. Points to be noted for single NIC: > Firewall must support NAT Reflection, if not then you can use dual NATing to achieve NAT reflection on unsup...