cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

AMA-CUCM Troubleshooting: Best Practices for Reading Trace Files

190
Views
0
Helpful
3
Replies
Highlighted
Beginner

CME v12.3 <--> CUC 12.0 via SIP Trunk | Anyone has integrated..?

I am trying to integrate CME with CUC, however it does not work.

 

Reviewing the the Invite from CME to CUC, I dont't  see the Diversion field.

 

Any One, know how can enable on the CME...?

3 REPLIES 3
Rising star

Re: CME v12.3 <--> CUC 12.0 via SIP Trunk | Anyone has integrated..?

Hi,

Have you followed this integration document:

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/9x/integration/guide/cucme_sip/cucintcucmesip.html

 

Please rate helpful posts and if applicable mark "Accept as a Solution".
Thanks, Vaijanath S.
Beginner

Re: CME v12.3 <--> CUC 12.0 via SIP Trunk | Anyone has integrated..?

Tks, I follow the procedure with SIP and SCCP, and It does not work.

 

At the end, it was the version.

 

I had isr4300-universalk9.16.09.04.SPA.bin, and I did downgrade to isr4300-universalk9.16.06.06.SPA.bin, and it works with version 16.6.6.

 

 

Rising star

Re: CME v12.3 <--> CUC 12.0 via SIP Trunk | Anyone has integrated..?

Great that your issue is resolved. Thank you for sharing this information.

 

 

Please rate helpful posts and if applicable mark "Accept as a Solution".
Thanks, Vaijanath S.
CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards