Re: Compatibility of third party phones with Cisco phones
Device licenses are required for Cisco devices and for third-party devices,*** with the flexibility to replace third-party devices with Cisco devices. Device licenses are sold in increments of device-license units (DLU's). Device-license units are assigned to each device connected to Cisco Unified CallManager 5.0. Each device is assigned a unit number based on the type and capabilities of the device. Devices with more complex and high-end capabilities are assigned a higher number of units compared to devices with basic capabilities,
Application and phone software licenses are enforced. The system manages the maximum number of devices that can be provisioned.
â¢ Each device (Cisco Unified IP phones, third-party devices, and video devices) provisioned in the system corresponds to a number of device license units (DLUs), depending on its capabilities; the total number of units is managed in Cisco Unified CallManager to determine capacity.
â¢ DLUs must be purchased to cover the number of devices connected to Cisco Unified CallManager.
â¢ Third-party SIP devices require DLUs for operation with Cisco Unified CallManager.
we recently announced new addition in our portfolio : Webex Desk Pro.
The Webex Desk Pro is designed for executive desktop and focus rooms that accommodate one to two people.
It is an all-in-one premium collaboration and productivity devi...
i understand there is api and macro can be used to connect to service now via the touch panel . the problem in my organisation is that there is a need to connect to a proxy to be able to connect to service now how can i do that ? htt...
we recently announced new addition in our portfolio : Webex Room USB.
Cisco Webex® Room USB is a lighter version of the Webex Room Kit Mini that works as an extension of your laptop/desktop to provide advanced camera/a...
Hello ,we have problem with outgoing calls to international calls .My calls are getting disconnected in middle conference after 2 Hours .the scenario is : Cisco ip phone ->cucm Sip trunk to VGW->Cisco Router-> Priwe configure Maximum Call Duratio...