cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
6275
Views
0
Helpful
2
Replies
Highlighted
Beginner

Configure CallerID in Callmanager 6.1

Hi!

Where do I configure outgoing callerID for a bunch of numbers in Callmanager 6.1?

Thank you in advance!

Everyone's tags (1)
2 REPLIES 2
Highlighted
Hall of Fame Cisco Employee

Re: Configure CallerID in Callmanager 6.1

You configure it in several ways:

A) Configure the external phone number mask under each DN and check the use external party mask checkbox under the route patterns to use it

B) Configure it under the route pattern as calling party mask

C) Configure it at route list level as calling party mask

D) Configure it at GW/trunk level

The most common methods are A and B, C is mostly used then doing failover from ICTs to a PSTN GW.

Jaime Valencia
PDI Engineer
www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate
Highlighted
Beginner

Re: Configure CallerID in Callmanager 6.1

Thank you for the list, perfect!

I was the route pattern transform mask that needed changing!