CUBAC with Subscriber

[Paulo Ferreira]

Hello,

I have a CUBAC installed.

Where I configure the second node of the CUCM, the CUCM Subscriber?

Paulo Ferreira                 

[Leonardo Santana]

Hello Paulo,

Take a look on this doc

Cisco Unified Business/Department Attendant Consoles Web Admin / Installation Guide

http://www.cisco.com/en/US/docs/voice_ip_comm/cucmac/arc/arcag20114.pdf

Regards

Leonardo Santana

[Paulo Ferreira]

Hello Leonardo,

thanks fo your concern.

I didn't find any reference in the document to my problem

Can you help me?

Regards

Paulo Ferreira

[clileikis · Accepted solution]

Hi Paolo,

The second CUCM server (or backup CTI Manager) is entered during the initial installation when the Cisco TSP is installed.  See the following from the installation guide (for 9.0, although similar for previous versions):

See the following document starting on page 32:  http://www.cisco.com/en/US/docs/voice_ip_comm/cucmac/arc/CUACBE_V901_WA_.pdf

If we're talking about the CUCM IP on the Engineering > CUCM Connectivity, check out the following post on the Arc forums explaining the functionality and possible workaround:

http://forum.arcsolutions.com/showthread.php?1294-CUCM-Connectivity-add-SUB

HTH,

Chris