cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
280
Views
15
Helpful
4
Replies
bkhanal1971
Participant

CUC 8.6 instllation issue

I am trying to install Unity connection 8.6 in my lab environment but i dont' see the Unity connection as an install option. I tried to install many times but everytime the install option defaults to CUCM only. Any idea why so. I am using a low end Dell PE T110II with a few VMs.

Thank you for the help.

4 REPLIES 4
Bradley Gruesbeck
Cisco Employee

Hi,

If you don't see unity connection as an install option that means that the media isn't detecting adequate hardware. Are you using an ova template?

I would recommend looking up the hardware guide and make sure you have adequate gear to run it.

Good luck.


Sent from Cisco Technical Support iPad App

Leo Salcie Tejeda
Rising star

Hi,

Some media doesn't come with CUC, that will depend in the version you're installing.

Regards

Please remember to rate useful posts clicking on the stars below.
Favor calificar todos las respuestas útiles dando click en las estrellas de mas abajo.
___________________________________________
LinkedIn Profile: do.linkedin.com/in/leosalcie

__________________________________________________
Please remember to rate useful posts clicking on the stars below.
LinkedIn Profile: do.linkedin.com/in/leosalcie
Simon Leigh
Beginner

Make sure that your hard drive has at least 200 gb of free space on it.
You 'should' then see the option for unity.

Sent from Cisco Technical Support iPhone App

Thank you everyone who responded. As you all indicated, I was low on hardware resources. After I tried with 4 GB of RAM and 160+ GB harddrive, I got Unity Connection as an install option. Thank you all.

Create
Recognize Your Peers
Content for Community-Ad