cucm 11.5 cant start service with cli

[FrederikJochheim]

Hey fellows,

i want to activate/deactivate services via cli.

As an example:

"utils service list" shows the service "Cisco Dialed Number Analyzer" but i cant start or activate it.

"Invalid service name for activate/deactivate"

Cucm suggests some other services. But these i dont want to activate...

i have read some documentation but none of them contain any exclusions for the commands

Im looking forward the solutions!

[Nithin Eluvathingal]

AFAIK You need do that from GUI.

From CLI i believe  only  below  can be activated/deactivated.

Name Service Cache
Entropy Monitoring Daemon
Cisco SCSI Watchdog
Cisco Directory Number Alias Lookup
Cisco Directory Number Alias Sync

[FrederikJochheim]

Thank you for your reply. I knew that i can do it with the GUI. 

The challenge is, i want to script the activation/deactivation

[Roger Kallberg · Accepted solution]

Not all services can be restarted via CLI. The list you get is those that in you version can be restarted via CLI, the rest has to be restarted via the web UI.

[Nithin Eluvathingal · Accepted solution]

Below mentioned  services you can activate/Start from Cli and remaining you need to do it from GUI. 

Below names can be used with utils service activate

Name Service Cache
Entropy Monitoring Daemon
Cisco SCSI Watchdog
Cisco Directory Number Alias Lookup
Cisco Directory Number Alias Sync

Below mentioned services can be used with utils service start/Restart  

System SSH
Cluster Manager
Name Service Cache
Entropy Monitoring Daemon
Cisco SCSI Watchdog
Service Manager
HTTPS Configuration Download
Service Manager
A Cisco DB
Cisco CallManager Serviceability
Cisco CallManager Serviceability RTMT
Cisco CAR DB
Cisco Database Layer Monitor
Cisco Directory Number Alias Lookup
Cisco Directory Number Alias Sync
Cisco DRF Local
Cisco DRF Master
Cisco Push Notification Service
Cisco Tomcat
Platform Administrative Web Service
SNMP Master Agent