cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

CUCM 7.1.3 Not booting-CUCM 7.1.3 Not booting-Kernel Panic - not syncing: Attempt to kill init!

Sunish Nair
Beginner
Beginner

Hi,

Server is not booting and getting following error "Not booting-Kernel Panic - not syncing: Attempt to kill init!" 

 

For troubleshooting the particular issue i have done following things;

 

1. Rebooted the Server 1 or 2 times, still no luck.

2. used the Recovery CD for rectifying the issue and tried all the option which is available in the Recovery disk, unfortunately no luck (:

Kindly suggest me if any faced this issue and found any resolution for the same. Here i am attaching the snap shot of the error for your reference.  

Thanks in Advance. 

1 REPLY 1

Manish Gogna
Cisco Employee
Cisco Employee

Hi Sunish,

What are the hardware specs. Is it an MCS server or is it a virtualized lab enviroment? If it is a lab system, make sure the esxi version is at least 4.x.

HTH

Manish

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: