cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1459
Views
0
Helpful
11
Replies

CUCM & asterisk

Rosa Ladera
Level 1
Level 1

Hi,

when having cucm + asterisk as shown in connection B3 (attached file)

shoud I see this connection when executing show tech network ?

I do not

11 Replies 11

M Rinaldy Aulia
Level 1
Level 1

The attached document was not in English..

Attached a nee file

What do you mean by “see this connection”? What are you expecting to see?



Response Signature


Can not see asterisk

admin:show tech network hosts
-------------------- show platform network --------------------

/etc/hosts File:
#This file was generated by the /etc/hosts cluster manager.
#It is automatically updated as nodes are added, changed, removed from the cluster.

127.0.0.1 localhost
::1 localhost
147.65.21.120 voip2.impa.br voip2
147.65.21.130 presence.impa.br presence
147.65.21.110 voip1.impa.br voip1
admin:

As the output from the command states this:

/etc/hosts File:
#This file was generated by the /etc/hosts cluster manager.
#It is automatically updated as nodes are added, changed, removed from the cluster.”

Why would you believe that Asterisk should show up in this list? It’s not a part of the CUCM cluster.



Response Signature


so, how can I test from cucm if they are sending calls each other ?

1. Setup the needed configuration for integration with Asterisk and call routing to it.

2. Make a call.

3. Collect the CallManager traces.



Response Signature


 

 

Asterisk error when connecting to cucm. Any idea ?

NOTICE[1045] chan_sip.c: Peer 'SIP-CCMU-1' is now UNREACHABLE! Last qualify: 1

In CUCM do you have a SIP trunk for Asterisk? Do your Asterisk system consist of multiple nodes? If so the IP of all of these must be either on separate SIP trunks or all set on one.



Response Signature


See if you can grab a Wireshark capture of the traffic between Asterisk and CUCM, once you think you have the configuration correct.  

It is possible to ping asterisk from cucm

admin:utils network ping 147.65.115.248
PING 147.65.115.248 (147.65.115.248) 56(84) bytes of data.
64 bytes from 147.65.115.248: icmp_seq=1 ttl=63 time=0.578 ms
64 bytes from 147.65.115.248: icmp_seq=2 ttl=63 time=0.478 ms
64 bytes from 147.65.115.248: icmp_seq=3 ttl=63 time=0.474 ms
64 bytes from 147.65.115.248: icmp_seq=4 ttl=63 time=0.467 ms

 

but 147.65.21.110 is cucm ip

 

admin:utils network capture src 147.65.115.248 dest 147.65.21.110 verbose
Executing command with options:
size=128 count=1000 interface=eth0
src=147.65.115.248 dest=147.65.21.110 port=
ip=

Control-C pressed

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: