CUCM & PLM license usage

[Rishikul Saxena]

I have got CUCM integrated to PLM server.

Currently, PLM server displays error message of over subscription of Standard license by 2.

How can I find out which user/device/feature is causing an over subscription ? Is there a report which can be pulled ?

Installed System License details below :

Foundation : 100+

Basic : 100+

Standard : 0

Thanks, 

[Chris Deren]

In CUCM under licensing you can drill down to specific license type being used and who/what device is using it.

[Rishikul Saxena]

Hi Chris,

CUCM admin page does not have the license link in System tab. It is probably because CUCM is based on HCS license model. Is there some other place I can get this drill down information ?

Thanks,

[Venkatesh Perumal]

On the PLM interface click on Licenses, will get you the License Usage view/report.
from chart view you can see the insufficient licenses marked in red.

refer the below guide for explanation:

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/plm/10_0_1/userguide/CPLM_BK_U7066CD8_00_user-guide-rel-10-0-1/CPLM_BK_U7066CD8_00_user-guide-rel-10-0-1_chapter_0101.html#CPLM_RF_L9E7A306_00

P.S Pls rate helpful post.

[Rishikul Saxena]

Hi Venperum,

The document still does not provide drill down information for the exact amout of license usage.
Considering if I've got a system of 100+ end users, how can I find out that which enduser/device
is causing an overuse of license ?

Thanks,

[Rishikul Saxena]

Hi,

Has anyone found this similar issue ?

[Muthurani Lavanya Paneerselvam]

Hi Rishikul

You can get the license usage view from the PLM dashboard. Refer this document,

https://supportforums.cisco.com/document/12229791/understanding-cisco-prime-license-managerplm

Regards

Lavanya

[Rishikul Saxena]

Hi Lavanya,

The license usage view only provides high level license detail, which includes overall license consumption.

How can I get a drill down detail of the license consumption per user/device ?

CUCM in my case is based on HCS license model & the license tab from system menu is nonexistent.

Thanks, 

[jjc1]

The License Report is missing from the menu but you can access typing the URL: https://<IP>/ccmadmin/licensingreportEdit.do