cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
560
Views
5
Helpful
2
Replies
Highlighted
Beginner

CUCM Presence Redundancy Group question

Hi Guys,

 

I'm have just complete installing IM&P Sub on our clients production environment, my question is why does the "Assugbed Users" are starting to assigned to IM&P Sub not the Pub?
Can anyone explain it to me please? I think it should be all assigned to imp01 right?
Please refer to the screenshot

Thank you all!

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Advisor

Re: CUCM Presence Redundancy Group question

Hi ,

 

Check for the parameter "User Assignment Mode for Presence Server" Enterprise Parameter setting set to Balanced Mode

 

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/im_presence/configAdminGuide/10_5_1/CUP0_BK_CE43108E_00_config-admin-guide-imp-105/CUP0_BK_CE43108E_00_config-admin-guide-imp-105_chapter_00.html#CUP0_RF_UE9F2912_00

 

In the same link , check for User Redistribution.

After adding or removing nodes, you can redistribute users using the Rebalance Users parameter in system topology management GUI

regds,

aman

View solution in original post

2 REPLIES 2
Highlighted
Advisor

Re: CUCM Presence Redundancy Group question

Hi ,

 

Check for the parameter "User Assignment Mode for Presence Server" Enterprise Parameter setting set to Balanced Mode

 

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/im_presence/configAdminGuide/10_5_1/CUP0_BK_CE43108E_00_config-admin-guide-imp-105/CUP0_BK_CE43108E_00_config-admin-guide-imp-105_chapter_00.html#CUP0_RF_UE9F2912_00

 

In the same link , check for User Redistribution.

After adding or removing nodes, you can redistribute users using the Rebalance Users parameter in system topology management GUI

regds,

aman

View solution in original post

Highlighted
Beginner

Re: CUCM Presence Redundancy Group question

Thanks!