10-23-2014 01:40 AM - edited 03-19-2019 08:46 AM
Is it possible to do the migration from 7.1.5 to 10.5.1.10000-7 which we are doing for jump upgrade from 7.1.5 to 9.1.2.
The reason why I preferred because this jump upgrade we can achieve in isolated network.
In that case can anybody please help to get specific document for that. Kindly have a look on this case.
Regards,
Abi
10-23-2014 02:43 AM
You can use prime collaboration deployment. PCD will do your upgrade and migration without doing any jump upgrade or intermediate upgrade..
Please refer to the vide below.
https://www.youtube.com/watch?v=JzG4kz1_hL4
All upgrade documentation are available on cisco. Take some time and look at the CUCM 10.5 upgrade document
10-23-2014 02:49 AM
Hi Abi,
why to go for Jump upgrade when PCD is available .
You can also do upgrade if using same IP addresses in Non-Production/offline.
http://www.cisco.com/c/en/us/support/docs/unified-communications/unified-communications-manager-callmanager/118318-config-cucm-00.html
regds,
aman
10-23-2014 02:53 AM
Thanks Mr.Ayodeji for your prompt reply. I will check the video.
In isolated upgrade zero down time. But in PCD there is some down time expected.
10-23-2014 02:56 AM
What is the down time in PCD? PCD will be doing a migration from your current hardware platform to a virtual environment. The upgrade/migration is not happening on the same platform. I am not sure where the down time is.
02-19-2015 07:40 AM
Hi
Can you share the video to me?
Thanks.
02-20-2015 06:57 AM
https://www.youtube.com/watch?v=nMrS0hMES7A
Or just go to youtube and search for cisco PCD
02-23-2015 03:51 AM
Thanks for the video, I have never thought of or used PCD before, but I will try here after.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: