CUCM upgrade from 7.1.5 to 10.5.1.10000-7

[abeebvm]

Is it possible to do the migration from 7.1.5 to 10.5.1.10000-7 which we are doing for jump upgrade from 7.1.5 to 9.1.2. 

The reason why I preferred because this jump upgrade we can achieve in isolated network.

In that case can anybody please help to get specific document for that. Kindly have a look on this case.

Regards,

Abi

[Ayodeji Okanlawon]

You can use prime collaboration deployment. PCD will do your upgrade and migration without doing any jump upgrade or intermediate upgrade..

Please refer to the vide below.

https://www.youtube.com/watch?v=JzG4kz1_hL4

All upgrade documentation are available on cisco. Take some time and look at the CUCM 10.5 upgrade document

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/upgrade/10_0_1/CUCM_BK_U4214F9D_00_upgrade-guide-cucm-100.html

[Aman Soi]

Hi Abi,

why to go for Jump upgrade when PCD is available .

You can also do upgrade if using same IP addresses in Non-Production/offline.

http://www.cisco.com/c/en/us/support/docs/unified-communications/unified-communications-manager-callmanager/118318-config-cucm-00.html

regds,

aman

[abeebvm]

Thanks Mr.Ayodeji for your prompt reply. I will check the video. 

In isolated upgrade zero down time. But in PCD there is some down time expected.

[Ayodeji Okanlawon]

What is the down time in PCD? PCD will be doing a migration from your current hardware platform to a virtual environment. The upgrade/migration is not happening on the same platform. I am not sure where the down time is.

[juankcs85]

Hi

Can you share the video to me?

Thanks.

[Ayodeji Okanlawon]

https://www.youtube.com/watch?v=nMrS0hMES7A

Or just go to youtube and search for cisco PCD

[Wilson Samuel]

Thanks for the video, I have never thought of or used PCD before, but I will try here after.