cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Walkthrough Wednesdays
253
Views
0
Helpful
2
Replies
blackswans
Beginner

CUCM Upgrade Readiness Test & Migration with PCD

Hi,

I'm planning to make a migration with pcd from 9.1.2 to 12.5. So I've prepared the PCD task and made a upgrade readiness test. Failed on three topics. So should I continue with migration task to the new server? Because I will not make upgrade, should I still need to fix these failed parts?

Thanks.

 

1.3  FAIL    Network Adapter Type

     The existing Network Adapter type is unsupported in higher versions.Change

     to VMXNET3 before upgrade.

1.8  FAIL    Disk Space Check

 

     This server has 7 GB of available free space in /common.

     Typically, you need at least 25 GB of common partition space.

     Your deployment may require more space if you have a lot of TFTP data,

     music-on-hold (MOH) files, or many locale files installed.

     Install the ciscocm.free_common_space_v1.4.cop.sgn to clear some space on

     the server before starting an upgrade.

2 REPLIES 2
Jaime Valencia
Hall of Fame Cisco Employee

On PCD, upgrade is not an equivalent for migration, they're completely different things. They should NOT be used as interchangeable terms.

That COP file is meant for UPGRADES, only a few of the tests that the cop runs would be significant for a migration, and neither one of the ones you mention are relevant.

Do you understand how a PCD migration works?

HTH

java

if this helps, please rate

Thanks for your reply, so what should be checklist for PCD migration?
Content for Community-Ad

Spotlight Awards 2021