cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

187
Views
0
Helpful
1
Replies
Highlighted
Enthusiast

CUE 8.6.9 time is incorrect

My C3945 router works great and it keeps time perfectly.  We are on the east coast and we observe daylight savings time. 

TDC_CME_Router#sh clock
17:30:03.061 DST Wed Jul 24 2019
TDC_CME_Router#sh ntp associations

address ref clock st when poll reach delay offset disp
*~192.99.2.8 213.251.128.249 2 3 64 377 128.24 4.585 4.293
~127.127.1.1 .LOCL. 7 7 16 377 0.000 0.000 0.231
192.168.69.41 192.168.69.1 4 223 1024 143 0.773 -2.207 92.053
+~138.68.46.177 90.187.7.5 2 31 64 377 120.49 7.116 5.102
192.168.50.51 192.168.69.1 4 29 1024 355 0.379 -18.572 24.480
+~198.50.238.163 213.251.128.249 2 33 64 377 120.12 -1.435 3.302
+~103.105.51.156 206.55.191.142 2 1304 1024 376 135.31 -1.595 16.936
+~162.221.74.15 185.140.51.3 2 41 64 377 133.29 5.868 6.135
* sys.peer, # selected, + candidate, - outlyer, x falseticker, ~ configured

I installed an ISM-300 voicemail module and got it working too.  However, the time is incorrect by one hour for the voicemail timestamps.  The phones show the correct time.  I cannot figure out how to get the ISM to recognize DST. I an ping the CME router from within CUE.

TDC-VMAA# sh ntp ser
remote refid st t when poll reach delay offset jitter
==============================================================================
*10.110.0.1 198.50.238.163 3 u 210 256 1 0.336 9.002 1.612
space reject, x falsetick, . excess, - outlyer
+ candidate, # selected, * sys.peer, o pps.peer
TDC-VMAA# ping 10.110.0.1
PING 10.110.0.1 (10.110.0.1) 56(84) bytes of data.
64 bytes from 10.110.0.1: icmp_seq=1 ttl=255 time=0.191 ms
64 bytes from 10.110.0.1: icmp_seq=2 ttl=255 time=0.172 ms
64 bytes from 10.110.0.1: icmp_seq=3 ttl=255 time=0.137 ms
64 bytes from 10.110.0.1: icmp_seq=4 ttl=255 time=0.127 ms
64 bytes from 10.110.0.1: icmp_seq=5 ttl=255 time=0.130 ms

--- 10.110.0.1 ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.127/0.151/0.191/0.027 ms, ipg/ewma 0.204/0.169 ms
TDC-VMAA# sh clock
16:24:56.161 EST Wed Jul 24 2019
TDC-VMAA# exit

Session closed


[Connection to 10.110.0.1 closed by foreign host]
TDC_CME_Router#sh clock
17:25:00.954 DST Wed Jul 24 2019

 

Everyone's tags (1)
1 REPLY 1
Rising star

Re: CUE 8.6.9 time is incorrect

Hi,

Can you try configuring "clock timezone America/New_York" command on CUE module.

 

Please rate helpful posts and if applicable mark "Accept as a Solution".
Thanks, Vaijanath S.
CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards