cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
7370
Views
0
Helpful
5
Replies
Beginner

CUPC 8.5 Device Registration Status Unknown in CUCM 8

We are using CUCM 8.03, CUPS 8, and CUPC 8.5.  I have added CUPC into CUCM using Cisco Unified Client Services Framework as Device Type and CSF<NAME> as device name.  I can log in CUPC and the problem was even if I am logged in, Device Status and IP Address in CUCM was showing “Unknown”.

Has anyone run into this before?  Any help will be appreciated.

Everyone's tags (5)
1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted

Re: CUPC 8.5 Device Registration Status Unknown in CUCM 8

Hi Bo,

Do you have the csf device under the controlled devices in the end user page in callmanager admin pages?

Have you configured the primary extension on the same page ?

Is the device name CSF ?

When you login to CUPC can you open the dialpad and make calls ? (maybe callmanager is reporting wrong status)

Let me know if the above help

Christos

View solution in original post

5 REPLIES 5
Highlighted

Re: CUPC 8.5 Device Registration Status Unknown in CUCM 8

Hi Bo,

Do you have the csf device under the controlled devices in the end user page in callmanager admin pages?

Have you configured the primary extension on the same page ?

Is the device name CSF ?

When you login to CUPC can you open the dialpad and make calls ? (maybe callmanager is reporting wrong status)

Let me know if the above help

Christos

View solution in original post

Highlighted
Enthusiast

Re: CUPC 8.5 Device Registration Status Unknown in CUCM 8

Ensure that "Use my deskphone for audio" is not checked.  While checked, CUPC is in deskphone mode and, as a result, will not register as a softphone.

If you uncheck it, it will at least attempt to register in softphone mode.  If it's still not working, have a look in CUPC under Help -> Show Server Health and let us know what comes up in Phone on computer

Just to note, if CUCM is reporting Unknown/Unknown for both fields, it means that the CSF device has never registered.  If you get Unregistered/ it will mean it has registered successfully at least once.

Highlighted
Enthusiast

Re: CUPC 8.5 Device Registration Status Unknown in CUCM 8

You can also try downloading the config file CSF.cnf.xml on your PC by executing the following command on your command prompt

tftp -i GET CSF.cnf.xml . Make sure the TFTP client is running on your PC.

Regards

Nitesh

Highlighted
Beginner

Re: CUPC 8.5 Device Registration Status Unknown in CUCM 8

Hi Guys,

Thank you very much for your help!

MS Office 2010 was in the way for CUCM to detect the devices.  When users switch to Office 2007 and CUPC will show registered to CUCM. We are still looking for ways to get CUPC integrated with Office 2010 and show register status in the CUCM.

Bo

Highlighted
Beginner

Re: CUPC 8.5 Device Registration Status Unknown in CUCM 8

Case update:

We had to uninstall CUPC 8.5, flushing out all UserData and registry settings.  Re-installed CUPC 8.5, and now they are shown as registered.

Thank you for your help!

Bo

CreatePlease to create content