06-27-2011 06:35 AM - edited 03-19-2019 03:11 AM
Hi Guys,
I have a CUPS 8.5 Deployment with CUPC 8.5. My CUPC is controlling my Deskphone and i can take my primary line calls from CUPC. I have a secondary line configured in my DeskPhone. Can i control my secondary line to answer calls from CUPC?
Thanks in advance.
Solved! Go to Solution.
06-27-2011 08:37 AM
Not simultaneously; the CTI control must choose a specific device/DN combination to control. Within CUPC you can click on the model that appears underlined at the bottom of the window. It will open the Desk Phone Device selection (i.e. CTI control) window. You will see a drop-down on the right where you can choose the DN to control.
Screenshot:
Please rate helpful replies.
06-27-2011 08:37 AM
Not simultaneously; the CTI control must choose a specific device/DN combination to control. Within CUPC you can click on the model that appears underlined at the bottom of the window. It will open the Desk Phone Device selection (i.e. CTI control) window. You will see a drop-down on the right where you can choose the DN to control.
Screenshot:
Please rate helpful replies.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: