Trying to get the above up and running. Every thing looks to be configured but when i run the trouble shooter i keeping getting the following:
Possible missing SIP trunk on Cisco Unified Communications Manager. Each Cisco Unified Presence server should have a corresponding SIP trunk configured (unless DNS SRV is enabled). Possible missing entries include: cups
Following the admin guide it says to use the <Cups-name>sip.com as the trunk destination address. In my example the server is called cups so i have used cups.sip.com.
Am i missing some thing?? I also tried creating a domain in active directory: cups.poc.com
hi Team, we are planning to deploy Multi-Factor Authentication for Jabber. The main requirement is to use MFA over internet (MRA).Is it possible to deploy MFA just for MRA and don't touch impact any on-prem existing setup?Can someone please guide on ...
Looking to expand your professional network? Interested in gaining an edge with exclusive technology insights? Engage with Cisco experts, share feedback on products and connect with peers from across the globe. Cisco Champion 2021 applications are open fo...
UCCX does not natively protect HTTP Triggers.
I wanted to come up with a solution to handle HTTP cookie based authentication.
There is a zip file for this project attached to this article. It was written on UCCX 12.5...
CUCM can backup the manually or have sehchduler to backup the configuration and historical reports from the server diester recovery systemStep 1. Navigate to CUCM > Disaster Recovery System > Backup > Manual Backup as shown in the...