cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
760
Views
0
Helpful
3
Replies

Dial Peer Status is anoying. How can i deactivate this messages?

marcel.pludra
Level 1
Level 1

Hi All,

 

since i have enabled options ping on my dial peer's i got every this messages from every dial peer every minute:

 

Sep  5 14:41:04.428: %SIP-5-DIALPEER_STATUS: VoIP dial-Peer <200> is Up
Sep  5 14:41:27.404: %SIP-5-DIALPEER_STATUS: VoIP dial-Peer <101> is Up
Sep  5 14:42:04.427: %SIP-5-DIALPEER_STATUS: VoIP dial-Peer <200> is Up
Sep  5 14:42:27.404: %SIP-5-DIALPEER_STATUS: VoIP dial-Peer <101> is Up

This is anoying when i want to debug something.

Is there a way to deactivate this messages?


IOS Version is 16.7.2

 

Thankyou for helping me :)

3 Replies 3

jonathan.salter
Level 3
Level 3
Share your router config please.
Please remember to rate useful posts, click on the stars below.

I have this same problem...there doesn't seem to be any functionality issue, we are just getting the message every 2 minutes which is the keepalive time.  We have other routers that do not get this message, but we are getting it on both routers that are running Fuji code.  16.7.3  So, nothing seems broke; just messages filling the log.

Does the far end support Options Ping?   If you run a SIP message debug you should see your option pings going out, and the far end should be replying.   

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: