cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
291
Views
0
Helpful
3
Replies
Beginner

Dial plan for 600 differents translation number

Hi

I have CUCM 8.5 and Voice gateway (cisco 2911) with FXO port and it work

CUCM user have number 7XXX

I have 600 different outsite number (local GSM or PSTN and international) that all 7XXX user should be abble to call

I created number 4XXX number

Each 600 different outsite number (local GSM or PSTN and international) have their corespondant on the 4XXX number

CUCM user 7XXX know only number 4XXX

When user 7XXX dial number 4XXX, the call is forwaded to their corespondant (outside number) number between the 600 different outsite number through the voice gateway

CUCM internal user
CUCM dialed number
outside number

7001 - 7999

490222567898

7001 - 7999

40265678676789

7001 - 7999

4808+22009872536

7001 - 7999

4222+33987655678845

When user 7001 - 7999 dial number 4902, the call is forwaded to 22567898 through  the voice gateway

When user 7001 - 7999 dial number 4026, the call is forwaded to 5678676789 through  the voice gateway

When user 7001 - 7999 dial number 4808, the call is forwaded to +22009872536 through  the voice gateway

When user 7001 - 7999 dial number 4222, the call is forwaded to +33987655678845 through  the voice gateway

How can I plan and implement these dial plan for the 600 different outsite number

Should I create one dial plan for each number ?

Thanks in advance for your answer

Everyone's tags (5)
3 REPLIES 3
Highlighted
Hall of Fame Master

Dial plan for 600 differents translation number

So, you basically have whole bunch of system speed dials that translate 4 digit numbers to full PSTN number, great if people actually know and use these. In either case since you are already doing the translation on CUCM side then there is no reason for anything extra on GW. Simply translate the number via TP, match appropriate Route Pattern which points to RL --> RG --> GW and then match one of pre-defined dial-peers, i.e. Local, LD, International, etc.

Chris

Highlighted
Beginner

Dial plan for 600 differents translation number

Hi and thanks for your answer

Is it mean that I should create 600 translation pattern for the 600 different outsite number in the CUCM ?

Regards

Highlighted
Hall of Fame Master

Dial plan for 600 differents translation number

If these system speed-dials are needed then, yes create 600 TPs. You can build them in Bulk with BAT export/import feature.

HTH, please rate all useful posts!

Chris

CreatePlease to create content