Hi Moe,
Licensing for Cisco Unified Mobility
This section contains information on licensing for Cisco Unified Mobility.
Cisco Unified Communications Manager Administration Configuration Tips and GUI Changes
•
System > Licensing > License Unit Calculator—Displays a row for Mobility Enabled End User (Adjunct), which displays the number of device license units that are consumed and credited for adjunct devices that are used specifically for Cisco Unified Mobility.
•User Management > End User—Displays the Enable Mobility check box, which triggers device license units to get consumed; works in conjunction with the Primary User Device drop-down list box.
If you check the Enable Mobility check box and fail to choose an adjunct device from the Primary User Device drop-down list box, four device license units (DLUs) get consumed, as indicated in the Mobility Enabled End Users row in the License Unit Calculation window.
If you enable Cisco Unified Mobility and later choose an adjunct device from the Primary User Device drop-down list box, the system credits you with two DLUs, as indicated in the Mobility Enabled End Users row in the License Unit Calculation window.
•User Management > End User—Displays the Primary User Device drop-down list box, which controls the number of device license units that are consumed for adjunct devices for Mobile Connect; works in conjunction with the Enable Mobility check box in the End User Configuration window.
After you check the Enable Mobility check box, choose an adjunct device that you want to assign to the user specifically for Cisco Unified Mobility. For example, choose a device, such as a desktop phone, that the user uses in addition to the cell phone for Cisco Unified Mobility.
Before you choose an adjunct device, consider the following information:
–Only devices that consume two or more device license units (DLUs) display in the drop-down list box.
–For Cisco Unified Mobility, you cannot assign the same device to multiple users, so only the devices that you can assign display in the drop-down list box.
–If you check the Enable Mobility check box and choose a device from the drop-down list box, two DLUs get consumed, as indicated in the Mobility Enabled End Users (Adjunct) row in the Licensing Unit Calculation window.
–If you delete the device from Cisco Unified Communications Manager Administration or remove the assignment after you enable Mobile Connect, two DLUs get consumed after you delete the device or remove the assignment, as indicated in the Mobility Enabled End Users row in the License Unit Calculation window.
Please refer the below release notes for more information.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucmbe/rel_notes/6_1_2/cucmbe-rel_note-612_2.html
Hope it helps.
Anand
Please rate helpful posts by clicking on the stars below the right answers !!
