01-19-2015 05:18 AM - edited 03-19-2019 09:03 AM
Dear All,
I have successfully migrate 8.6 to 10.5.2 publisher and I got error message while sub migration.
tried again to install manually sub 4 times but all the time I got same error message.
Disabled the LRO setting as recommended by TAC but no luck.
error attached.
01-19-2015 07:56 AM
Hi,
I suppose u have opened a TAC case and did changes in LRO but did not help.
Just to share with you:
Even we faced the similar issue of LRO and did the workaround but did not solve the issue.
TAC engineer added the script in PUB to fix the issue.
In existing PUB, can u share show version active
regds,
aman
01-19-2015 05:09 PM
Hi Aman,
Thanks for reply
it's version 10.5.2
now i'm trying with 10.5.1 will update you
thanks
01-22-2015 12:49 PM
Hi Aman,
Migration completed thanks for the given support.
Thanks
01-22-2015 09:37 PM
Gr8.
Can u share how the error message got resolved ?
regds,
aman
01-23-2015 08:44 AM
Hi Aman,
I have done the fresh install with different IP addresses both Pub/Sub.
shutdown old cluster and re-address 10.5 with previous cluster IP address.
Observed only cooperate directory not accessible issue
reason - IP address didn't change on enterprise parameter after re-addressing
After change IP it worked.
Thanks.
01-23-2015 11:00 PM
thanks for sharing [+5]
was this suggested by TAC.
regds,
aman
01-23-2015 11:27 PM
actually not.
I just wanted to dump the log file and also wanted to install without shut down running cm. this is the reason to use separate IPs.
It was success.
Thanks.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: