cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
957
Views
25
Helpful
5
Replies
Highlighted
Enthusiast

Export of Current Firmware on Devices

I did not see an option under exporting phone details, and I am looking for a report that lists all the devices with the firmware that is currently loaded on each of them.  Running CUCM 9.1.2.  Thanks!

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Cisco Employee

You can run show risdb query phone on all the CM servers in the cluster to which phones are registered and then sort out the output in MS Excel and find the active FW load

http://www.cisco.com/c/en/us/support/docs/unified-communications/unified-communications-manager-callmanager/118307-probsol-cucm-00.html

Regards

Deepak

View solution in original post

5 REPLIES 5
Highlighted
Cisco Employee

"show tech devdefaults"  command will provide phone firmware defined in CUCM.

"show risdb query phone" command will provide phone firmware loaded on the phone.

HTH

Regards,

Mohammed Noor

Highlighted

[+5] to Khan for sharing the command "show tech devdefaults" regds, aman
Highlighted
Advisor

hi , 

check this discussion

https://supportforums.cisco.com/discussion/12012036/how-know-firmware-version-all-devices-cucm-cluster

regds,

aman

Highlighted
Cisco Employee

You can run show risdb query phone on all the CM servers in the cluster to which phones are registered and then sort out the output in MS Excel and find the active FW load

http://www.cisco.com/c/en/us/support/docs/unified-communications/unified-communications-manager-callmanager/118307-probsol-cucm-00.html

Regards

Deepak

View solution in original post

Highlighted
Enthusiast

Thank you everyone!

Content for Community-Ad