cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1317
Views
15
Helpful
7
Replies
Frequent Contributor

Expressway-c cannot connect to IMP

Hi,

I have upgraded Expressway C&E from 8.2 to 8.8.2 (the latest). After upgrade the Expressway has a connection with the CUCM, but not anymore with IMP. In the GUI from Expressway-C and checking the "IMP and Presence nodes" I see the status

Inactive: (Remote host is reachable but connection is not established. Either refresh this page, or check the credentials.)

I have deleted the node and added it again, but each time I see this message. When I give a wrong password I get the message wrong password, so some communication is established.

Anyone has seen this?

CUCM version 11.5.1.11900-26

IMP version 11.5.1.11900-21

Any help would be apreciated

JH

7 REPLIES 7
Cisco Employee

Hi JH,

Hi JH,

In version 8.8, there is a new module cvs.verifier which is doing more struct checks on the certificate.  In order to discover successfully a CUCM/IM&P cluster when using self signed certificates, certificate of each node of the cluster MUST be added to the trust store of Expressway. If there is one missing certificate, discovery will fail for all nodes.

You may verify this and see if it helps.

Manish

Frequent Contributor

Hello Manish,

Hello Manish,

I downloaded the tomcat certificate from the IMP server and uploaded it to the trusted store of Expressway-C. From the log-files from Expressway-C I can see there is an issue with the certificate, some messages regarding "handshake"

The issue is that the CUCM is discovered correctly

Maybe a regenerate of the IMP certificate?

Tanks!

Jan

Enthusiast

Hi ,,

Hi ,,

I have the same exact issue, any update regarding this please.

Frequent Contributor

we execute the following

we execute the following command on Expressway-C

xConfiguration XCP TLS Certificate CVS EnableCvs: Off

No idea what it does, but it solved the problem

Re: we execute the following

Thanks, It Worked for me.

Enthusiast

The issue was resolved when I

The issue was resolved when I added the XMPP certificate of the IMP on the expressway 

Highlighted
Beginner

As to add to this topic: i

As to add to this topic: i was seeing the same behaviour after having upgraded the IM&P node from 10.5.1 to 10.5.2.24900-8 (while using X8.8.3 on Expressway-C/E)

Restarting the XCP Router services on the IM&P node resolved the matter for me.

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards