FAX with CME

[ahjawad1693]

Hello

I need help in configuring FAX on ATA 186 with CME 4.1.

I tried googling but found so many docs, its all confusing.

I dont mind using h.323 or SCCP.

Please reply with sample config and refernce, if possible.

Thank YOU

[smizerny]

Hi,

Unified Communications Manager Express (CME) 4.x started the support of g.711 FAX pass through with ATA (SCCP Controlled).  No Application Acceleration Platform (AXP) application, or other app is required.  Some sample configs can be found at:  http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmebasic.html#wp1045695

Also I have attached a Power Point file with some additional information.

Regards,

Stan Mizerny

Product Marketing Mgr.

[ahjawad1693]

Hello Stan,

Thank you very much for your reply.

This is the first peice of right information which i got in this matter.

I got it going with the configuration provided in presentation.

Appreciate your help very much.

Jawad