cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2127
Views
7
Helpful
6
Replies
Highlighted
Beginner

How to configure Siemens OpenStage 15 HFA?

Hi,

We have just changed our old Philips digital telephone system to Cisco's VoIP system.  So we don't know much about this thing.

From another office, we got a lot of telephones -- Siemens OpenStage 15 HFA.

We would like to know how to configure these telephones to work with Cisco's VoIP system.  I mean, what device should we take?

Here's the info about our Cisco system: System version: 11.5.1.13900-52

Thanks in advance.

6 REPLIES 6
Highlighted
Contributor

You can try configuring them as basic or advanced SIP devices. Be ware, that you will need to find a way to inform the phones abouf the CUCM.

fortvald
Highlighted

Thanks for your reply.

OK, I see, there are "Third-party SIP Device (Advanced)" and "Third-party SIP Device (Basic)" in the list of "Phone Type".

I'll try it.

Highlighted

Hi dude! OpenStage 15 HFA successful working via "Third-party SIP Device (Advanced)" ?

Tnx.

Highlighted

Hi dude! OpenStage 15 HFA successful working via "Third-party SIP Device (Advanced)" ?

Tnx.
Highlighted
Beginner

Hello Bryan,

 

The thread is quite old and you seemed to have made the phones work with CUCM.

 

We are trying to do the same and somehow the phones are not working

 

Can you please help us with the steps you followed to make these phones work

 

Thanks in advance

Kunal

Highlighted

Hi Albert,

 

My bad I called you Bryan.

 

Thanks,

Kunal

Content for Community-Ad