02-26-2019 11:13 PM - edited 02-26-2019 11:15 PM
I have setup two Telepresence codecs and each can call the other using SIP protocol by dialing the IP assigned. But I have seen people have SIP-URIs like sip:abc@pqr.xyz. How do I get/create my own SIP-URI?
Thanks
Rishad
Solved! Go to Solution.
02-27-2019 03:13 AM
Hi Shams,
May I know your codec type? Is it Standalone or register with UCM or VCS/Expressway?
If it is standalone, then the recommended method is to use h323. if you want to use a SIP URI, you need a SIP Registrar server and SIP proxy server.
SIP URI is the SIP alias with the domain name.
Regards,
Shalid
02-27-2019 03:13 AM
Hi Shams,
May I know your codec type? Is it Standalone or register with UCM or VCS/Expressway?
If it is standalone, then the recommended method is to use h323. if you want to use a SIP URI, you need a SIP Registrar server and SIP proxy server.
SIP URI is the SIP alias with the domain name.
Regards,
Shalid
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: