cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
293
Views
0
Helpful
3
Replies
Highlighted
Beginner

Incoming Call Issues

Hello

I have a small location using cisco 1760, where is only 3 ip phones attach to our main call manager 6.1. The issue is when someone call to that office and pickup the phone at the moment they closed the call the routes stay with both line busy and for relase the lines the need to reboot the routers, since is a small office the router has a connection plar configure with the extention of the recepcion extension.

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Beginner

Re: Incoming Call Issues

Hi Yancy,

Could you please provide the answers to the following questions:

1. is the Cisco 1760 router acting as MGCP or H.323 Gateway?

2. What is the call flow? Is the issue happening with calls from the PSTN? or is it happening for internal calls also?

Does the call flow looks something like this below:

CUCM--------1760------FXO---PSTN

3. Please send me the output of the following debugs from a particular call.

1. debug voice ccapi inout

2. debug vpm signal

3. debug voip vtsp all

4. Sh tech(from the gateway)

5. sh voice port summary

Please do mention the Called as well as Calling number.

At this point of time, it seems to be a issue with FXO supervisory disconnect.

You may as well refer the following link for more information:

http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a00800ae2d1.shtml

Thanks,

Som.

View solution in original post

3 REPLIES 3
Highlighted
Beginner

Re: Incoming Call Issues

Hi Yancy,

Could you please provide the answers to the following questions:

1. is the Cisco 1760 router acting as MGCP or H.323 Gateway?

2. What is the call flow? Is the issue happening with calls from the PSTN? or is it happening for internal calls also?

Does the call flow looks something like this below:

CUCM--------1760------FXO---PSTN

3. Please send me the output of the following debugs from a particular call.

1. debug voice ccapi inout

2. debug vpm signal

3. debug voip vtsp all

4. Sh tech(from the gateway)

5. sh voice port summary

Please do mention the Called as well as Calling number.

At this point of time, it seems to be a issue with FXO supervisory disconnect.

You may as well refer the following link for more information:

http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a00800ae2d1.shtml

Thanks,

Som.

View solution in original post

Highlighted
Beginner

Re: Incoming Call Issues


Hello

Thanks for your answer

Tomorrow I'll give all the answer that you need because I'm free of office today.

Highlighted
Beginner

Re: Incoming Call Issues

Hello

Here's the answer for the question that you ask

also there's a network diagram when you can see that between the remote site and the main site is a H323 gateway.

Attach you will see the diagram and the debug files

Thanks