cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

AMA-CUCM Troubleshooting: Best Practices for Reading Trace Files

668
Views
0
Helpful
7
Replies
Highlighted
Beginner

Installation of CUEACS - Error

Hello,

I try to install the Cisco Unified Enterprise Attendant Console Server but it's don't work.

I lauch the "CUEACS_Setup.exe" but after some checks i see the error :

cueacs.bmp

I have try some tests like this : http://support.microsoft.com/kb/929991 but the problem still the same.

Thanks in advance for your help.

Regards, Fabien.

Everyone's tags (3)
1 ACCEPTED SOLUTION

Accepted Solutions

Installation of CUEACS - Error

Hi

Ah - the manual says this:

 

 

Windows 2003 Server SP2 running Windows English Regional Settings. Windows 2008 R1 (32 bit) Server is also supported


I suspect that it's failing because of your language settings.

Try switching to English?

Aaron

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
7 REPLIES 7

Installation of CUEACS - Error

Hi

What account are you logging in as?

What is the OS?

Aaron

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
Beginner

Installation of CUEACS - Error

Hi,

I log with the Administrator account.

I'm under Windows 2008 Server SP2.

I have install the software (.NET Framework...) request by Cisco but it's don't work...

Thanks for your help Aaron.

Installation of CUEACS - Error

Hi

Is it 32-bit or 64-bit 2008?

Which version of the framework have you installed?

Aaron

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
Beginner

Installation of CUEACS - Error

I'm in 32-bit version and i have install .NET Framework SP1.

I try to install the CUEAC_SV_8.6.1.9.

Fabien.

Installation of CUEACS - Error

Hi

Ah - the manual says this:

 

 

Windows 2003 Server SP2 running Windows English Regional Settings. Windows 2008 R1 (32 bit) Server is also supported


I suspect that it's failing because of your language settings.

Try switching to English?

Aaron

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
Beginner

Installation of CUEACS - Error

Hi Aaron,

So i have make a new install on Windows Server 2008 English and the setup works fine.

I have desactivate the User Account Control in Windows 2008 and i have not activate the Remote Access it was activate on the old server. Probably was the problem, i don't know.

Really thanks for your help and i hope this post will be helpful.

Regards.

Fabien.

Installation of CUEACS - Error

Good to hear you have it fixed.

Please remember to rate useful responses and mark 'answered' if appropriate.

Aaron

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards