I am trying to install CUCM 7.1 on HP Proliant DL 320 (2 x 500GB hard Drive, Dual-Core Intel (R) Xeon (TM) Processor 3.00 GHz/ 1333 MHz, 6MB L2) for a lab I'm trying to setup. When doing this, on CUCM 7.1, I get detecting server Hardware - this can take several minutes then it displays
Validation error on HSSI mode:
7825H4 Validation Failure:
7828H4 Validation Failure
CPU Speed Validation Mismatch: found [3.00GHz]
Memory Size Validation Mismatch: found [4 GB] expecting [8 GB]
Hi, did you check whether the HW is supported at all? You cannot just go and install CUCM on any server platform. What I would do: go and install VMWare ESXi on the server and then install CUCM. For lab purposes, this would be alright. G.
Datacenter virtualization is the process of employing virtual hardware for designing, developing, and implementing the datacenters. It is often used as an umbrella term that entails different categories like application virtualization, server virtua...
When talking about Dial Plan and Digit Manipulation Cisco Unified Communication Manager, three components play an important roles to perform the transformation of the calling and called parties.The Translation Pattern, Transformation Pattern and Rou...
ICE, STUN, and TURN are used to establish a MEDIA connection between two devices on different networks separated by firewalls and NAT servers. They do not apply to signaling between devices which means that if you cannot establish a signaling connec...
ICE, STUN, and TURN are used to establish a MEDIA connection between two devices on different networks separated by firewalls and NAT servers. They do not apply to signaling between devices which means that if you cannot establish a signaling ...
Learn about the All New Webex Events. Listen: https://smarturl.it/CCRS8E29 Follow us: https://twitter.com/ciscochampion The new Webex Events transforms your company meetings and corporate events with real-time online webinars and webc...