cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1237
Views
0
Helpful
6
Replies

IP communicator giving error as "No conference Bridge"

Roger B
Level 1
Level 1

Hello This is Rahul,

I am having CUCM 8 and have installed three ip  communicators (CIPC)in it. Now when i try to take all three  communicators in a conference call i am getting error "No conference  Bridge" on IP phone from which i am trying for conference call. Can  anyone help here to solve this issue.

1 Accepted Solution

Accepted Solutions

Rahul,

The Conference Bridge Configuration procedure is detailed here http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_0_2/ccmcfg/b04cnbrg.html

Please complete the steps then you should be able add the conf bridge to MRGL & thus will be available for phones to utilise.

Pls rate the post if it helps.

GP.

View solution in original post

6 Replies 6

Gajanan Pande
Cisco Employee
Cisco Employee

So the obvious question is, have you configured conference bridges ? If yes, what type i.e. software or hardware ?

GP.

Hi Gajanan,

Thank you for the update.

Can you please guude on the same, as i am not able to find confrence bridge in "Media Resource Group List".

Rahul,

The Conference Bridge Configuration procedure is detailed here http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_0_2/ccmcfg/b04cnbrg.html

Please complete the steps then you should be able add the conf bridge to MRGL & thus will be available for phones to utilise.

Pls rate the post if it helps.

GP.

Hi Gajanan,

Thanks now i am able to make conference calls.

Glad to hear that Rahul.

Kindly rate my post if it helped you fixing the issue.

GP.

& also mark this question as answerred if it is completely.

GP

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: