12-21-2011 01:03 AM - edited 03-19-2019 04:08 AM
Hello This is Rahul,
I am having CUCM 8 and have installed three ip communicators (CIPC)in it. Now when i try to take all three communicators in a conference call i am getting error "No conference Bridge" on IP phone from which i am trying for conference call. Can anyone help here to solve this issue.
Solved! Go to Solution.
12-21-2011 01:38 AM
Rahul,
The Conference Bridge Configuration procedure is detailed here http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_0_2/ccmcfg/b04cnbrg.html
Please complete the steps then you should be able add the conf bridge to MRGL & thus will be available for phones to utilise.
Pls rate the post if it helps.
GP.
12-21-2011 01:19 AM
So the obvious question is, have you configured conference bridges ? If yes, what type i.e. software or hardware ?
GP.
12-21-2011 01:27 AM
Hi Gajanan,
Thank you for the update.
Can you please guude on the same, as i am not able to find confrence bridge in "Media Resource Group List".
12-21-2011 01:38 AM
Rahul,
The Conference Bridge Configuration procedure is detailed here http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_0_2/ccmcfg/b04cnbrg.html
Please complete the steps then you should be able add the conf bridge to MRGL & thus will be available for phones to utilise.
Pls rate the post if it helps.
GP.
12-25-2011 10:32 PM
Hi Gajanan,
Thanks now i am able to make conference calls.
12-25-2011 10:35 PM
Glad to hear that Rahul.
Kindly rate my post if it helped you fixing the issue.
GP.
12-25-2011 10:36 PM
& also mark this question as answerred if it is completely.
GP
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide