cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

238
Views
0
Helpful
2
Replies
qdwang
Cisco Employee

Issue with public distribution list as owner of call handler

I configured a call handler aa with extention 2000.

Also configure a Cti Route Point with extension 2000 on Callmanager. The Cti Route Point will foward all calls to the voice mail.

When i choose a subscriber as the owner of the call handler, i can dial 2000 and reach the greeting.

But when i choose a public distribution list as the owner of the call handler, i hear system error when dialing 2000. Is there anything missed here?

2 ACCEPTED SOLUTIONS

Accepted Solutions
Hin Lee
Cisco Employee

I tried to replicate your issue on Unity 4.0(3) Sr and CCM 4.0(1) but did not have a problem. I changed the owner to a PDL with one subscriber.

I think your problem may actually be the MESSAGES link for the CH; make sure the recipient is valid. If it is NULL, then you would hear failsafe.

View solution in original post

Hin Lee
Cisco Employee

CSCec53192 Call Handler owned by distribution list causes failsafe

Symptom:

A Call Handler with a distribution list as an owner will cause failsafe.

The following events will be in the event log:

Event Type: Error

Event Source: CiscoUnity_ConvPH

Event Category: Error

Event ID: 141

Date: 10/8/2003

Time: 11:06:49 AM

User: N/A

Computer: SERVERNAME

Description:

Unable to get information from the mailuser. A possible cause could be a

corrupted database entry. The procedure call

IAvDohPropertyManager::QueryInterface(IID_IAvDohMailUser) returned [0x80004002]

on line 690 of file e:\views\cs_UE4.0.2.129\un_Conv2

\AvConvPhoneHandler\AvConvPHAttemptForwardSvr\AvConvPHAttemptForward.cpp.

Event Type: Error

Event Source: CiscoUnity_ConvPH

Event Category: Error

Event ID: 137

Date: 10/8/2003

Time: 11:06:49 AM

User: N/A

Computer: SERVERNAME

Description:

Unable to route the call to a subscriber. The procedure call

RouteCallToSubscriber returned [0x80004002] on line 180 of file

e:\views\cs_UE4.0.2.129\un_Conv2\AvConvPhoneHandler\AvConvPHAttemptForwardSvr

\AvConvPHAttemptForward.cpp.

Conditions:

A Call Handler with a distribution list as an owner will cause failsafe.

The owner of a Call Handler can be seen on the Profile page for the Call

Handler.

This defect will be resolved in Cisco Unity 4.0(4). Applying ES50 onto Cisco

Unity 4.0(3) will resolve the issue.

Workaround:

The owner of the Call Handler can usually be changed to a Subscriber and

still maintain the desired behavior for the Call Handler. The recipient

of the Call Handler message can be a distribution list without a problem.

Upgrading to Cisco Unity 4.0(4) or applying ES50 onto Cisco Unity 4.0(3) will resolve the issue.

View solution in original post

2 REPLIES 2
Hin Lee
Cisco Employee

I tried to replicate your issue on Unity 4.0(3) Sr and CCM 4.0(1) but did not have a problem. I changed the owner to a PDL with one subscriber.

I think your problem may actually be the MESSAGES link for the CH; make sure the recipient is valid. If it is NULL, then you would hear failsafe.

View solution in original post

Hin Lee
Cisco Employee

CSCec53192 Call Handler owned by distribution list causes failsafe

Symptom:

A Call Handler with a distribution list as an owner will cause failsafe.

The following events will be in the event log:

Event Type: Error

Event Source: CiscoUnity_ConvPH

Event Category: Error

Event ID: 141

Date: 10/8/2003

Time: 11:06:49 AM

User: N/A

Computer: SERVERNAME

Description:

Unable to get information from the mailuser. A possible cause could be a

corrupted database entry. The procedure call

IAvDohPropertyManager::QueryInterface(IID_IAvDohMailUser) returned [0x80004002]

on line 690 of file e:\views\cs_UE4.0.2.129\un_Conv2

\AvConvPhoneHandler\AvConvPHAttemptForwardSvr\AvConvPHAttemptForward.cpp.

Event Type: Error

Event Source: CiscoUnity_ConvPH

Event Category: Error

Event ID: 137

Date: 10/8/2003

Time: 11:06:49 AM

User: N/A

Computer: SERVERNAME

Description:

Unable to route the call to a subscriber. The procedure call

RouteCallToSubscriber returned [0x80004002] on line 180 of file

e:\views\cs_UE4.0.2.129\un_Conv2\AvConvPhoneHandler\AvConvPHAttemptForwardSvr

\AvConvPHAttemptForward.cpp.

Conditions:

A Call Handler with a distribution list as an owner will cause failsafe.

The owner of a Call Handler can be seen on the Profile page for the Call

Handler.

This defect will be resolved in Cisco Unity 4.0(4). Applying ES50 onto Cisco

Unity 4.0(3) will resolve the issue.

Workaround:

The owner of the Call Handler can usually be changed to a Subscriber and

still maintain the desired behavior for the Call Handler. The recipient

of the Call Handler message can be a distribution list without a problem.

Upgrading to Cisco Unity 4.0(4) or applying ES50 onto Cisco Unity 4.0(3) will resolve the issue.

View solution in original post

Content for Community-Ad