Anybody tested such product as Jabber Guest?
In my infrastructure I have CUCM 9.1. I deployed Jabber Guest and try integrate it in private LAN without VCS-Control and VCS-Expressway.
CUCM and Jabber Guest are in one subnet x.x.20.0 and pingable. I did SIP Trunk on CUCM. On jabber Guest as sip-server used CUCM.
I have created link to DN:108 and when I tryed to cal I get error:
"SIP Error. The destination associated with this link is not reachable."
According troubleshooting in guide:
• The DN embedded in the link, or associated with the link, does not exist on the Cisco UnifiedCommunications Manager or Cisco TelePresence Video Communication Server.
but DN:108 it's my DN and it's reachable.
Anybody have any idea?
To order Jabber Guest, you must order the $0 part number under UCL or CUWL Standard or PRO at the http://cisco.com/go/ccw . Dedicated Expressway C and Expressway E are also required.
Order at least 2 Rich Media Sessions since one is required on the Expressway C and one on the Expressway E for each single Jabber Guest session. For example: a customer wanting to be able to support 5 Jabber Guest sessions simultaneously would require 10 Rich Media Sessions.
Top Level Part Number R-UCL-UCM-LIC-K9