Jabber is using he 3g or Wifi interface IP address to register into the CUCM instead of the tunnel interface IP address.
We having an issue with Jabber voice 9.x with call manager 8.5.
while we are calling from outside through vpn connect there is one way audio issue.ip phone user can hear the audio from the jabber user.
But opposite side there is no audio.Also we are not able make the call from the ip phone (Desk phone).
We have found that while try to connect from 3g or different network I’ve found that the Cisco Jabber Voice is using the 3g or Wifi interface IP address to register into the CUCM instead of the tunnel interface IP address.
As a result, the phone is registered but there is one way audio for all calls.
Is there any possibility to force the ip address of an application or the phone? Any ideas any workaround?
Cisco Finesse Not Ready - Call Overlap status is very a very common issue seen on Finesse desktop. Agents miss two calls and they are put in Not Ready - Call Overlap status. This is very likely related to CVP server and it's unreachabl...
Lab 1: Cisco Meeting Server Standalone CertificatesLab 2: Cisco Meeting Server Cluster Certificates with Multi-SANLab 3: Multiple Certificates with Multiple CA ServersLab 4: Cisco Meeting Server Cluster Certificates Advanced ScenarioLab 5: Streamer Servic...
Certificates are the first step to deploy Cisco Meeting Server, preparing certificate are very important to enable different services. As a VOIP administrator, mastering the concept of certificates is unavoidable
Using multiple CA servers, instead of a si...
I just finished to write a comprehensive certificates preparation for Cisco Meeting Server Clustering. Through 60 pages I explained in detail, how to create certificates for database cluster, callbridge cluster, certificate chain for webbridge3, certifica...