cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3694
Views
11
Helpful
4
Replies

Local Directory not showing when using CME 8.6?

ryabutler
Level 1
Level 1

Hi,

I have a strange issue.  We are running CME 8.6 on a 2911.

We created directory entries under telephony-service.

However, on any IP phone if we click on the "Directories" button the option for "Local Directory" does not show up.

And we confirmed it is enabled:

show telephony-service | i local directory

local directory service: enabled.

What am I missing to get "Local Directory" listed on our phones?

Thank you!

-rya

4 Replies 4

ronpatel
Level 8
Level 8

HI

Have you configured  following command under telephony service

url directories http

Regards

Ronak Patel

Rate helpful posts.

Regards Ronak Patel Rate all helpful post by clicking stars below the answer.

Huh, I removed  "ip http access-class 23" and all my directories (and services) popped right up.

I never knew that. 

So I just updated ACL 23 to include our remote site network.

Thank you!

-rya

Hi,

If it was helpful, rate post accordingly.

regards

Ronak Patel

Regards Ronak Patel Rate all helpful post by clicking stars below the answer.

Hi,

same problem for me with 2921 running IOS 15.2(4)M2 with CME 9.1

I had to do the following :

no ip http access-class 23

no ip http server

ip http access-class 23

access-list 23 permit

ip http server

After that, local directory work fine.

Regards

JC

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: