cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
434
Views
0
Helpful
2
Replies
Beginner

MCS 7825I4 to CUCM 8.6

Hello.

I´m trying to upgrade CUCM 7.1.5 to CUCM 8.6 into MCS 7825I4.

According the compatibility matrix i need to add 2 MB of RAM more.

MCS 7825

2GB

For   version 8.0(3) or higher, 4 GB strongly recommended, required for 8.6(1)+

My question is, if i buy this memory ram and put into the MCS, the server is supported or loose the guarantee?

Thank you.

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Participant

MCS 7825I4 to CUCM 8.6

It's still supported.  Technically you're supposed to buy the official Cisco part number from a Cisco reseller, but since those servers are end-of-life, I'm not sure you can still do that.  The part number was MEM-7825-I4-2GB=.  You can probably look for that on the secondary market, or check with your reseller. 

View solution in original post

2 REPLIES 2
Highlighted
Participant

MCS 7825I4 to CUCM 8.6

It's still supported.  Technically you're supposed to buy the official Cisco part number from a Cisco reseller, but since those servers are end-of-life, I'm not sure you can still do that.  The part number was MEM-7825-I4-2GB=.  You can probably look for that on the secondary market, or check with your reseller. 

View solution in original post

Highlighted
Beginner

MCS 7825I4 to CUCM 8.6

Thank you for the reply.

CreatePlease to create content
Content for Community-Ad
FusionCharts will render here