cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1374
Views
0
Helpful
0
Replies
Beginner

Meeting Place Express : Fast Busy Signal Heard When Using a Cisco IP Phone

As far we know nothing has changed.

Recentl we started having issues with Meeting Place Express : Fast Busy Signal Heard When Using a Cisco IP Phone.

Any Idea? Anyone?

I followed this link, still same issue.

http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace,_Release_6.x_--_Troubleshooting_Cisco_Unified_MeetingPlace_H.323/SIP_IP_Gateway_Software_Release_5.3_With_Release_6.x#Fast_Busy_Signal_Heard_When_Using_a_Cisco_IP_Phone

Fast Busy Signal Heard When Using a Cisco IP Phone

Possible Cause-The route pattern to IP-gateway server may not be configured properly in Cisco Unified Communications Manager.


Corrective Action -To resolve a fast busy-signal problem, verify that the configuration information that you entered in the Assigning a Cisco Unified Communications Manager Route Pattern to Point to the Cisco Unified MeetingPlace H.323/SIP IP Gateway Server page is correct.


To verify the configuration, perform the following steps:

  1. In the Cisco Unified Communications Manager Administration page, choose Route Plan > Route Pattern.
  2. Verify that the settings are correct and make changes if necessary.
  3. When finished, click Insert.


Possible Cause-All IP ports on the Cisco Unified MeetingPlace Audio Server system are in use.


Corrective Action-Confirm that Cisco Unified Communications Manager and the voice gateway have been configured to handle IP call overflow.

CreatePlease to create content