Migration from 9.1 to 11.5 2901 MGCP PRI

[Matt Conley]

Planning a migration of our 9.1 Cluster to 11.5 using PCD.  We have a 2901 serving as our MGCP Gateway for PRI PSTN.  Is there anything that needs to be done to the 2901 with the migration?

[Georgios Fotiadis · Accepted solution]

No you don't, as far as configuration is concerned; it should continue working as is.

The only thing you will need do at the 2901 is restart mgcp service:

(config)#no mgcp
(config)#mgcp

[Matt Conley]

Thanks for the quick answer... one less thing to check off the migration list.