cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
1030
Views
0
Helpful
3
Replies
Highlighted
Beginner

Per phone - Call authorization code

Hi,

I have a CUCM 7.1.5 and I want to implement a call authorization code for the internationnal calls.

I have seen the Matter code and the Force Authorization Code, but this apply to all the phones and users on the CUCM and this is the same code for all

Can I implement per phone or per line code for this authorization, in fact, I want differents codes for all the users...

Thanks in advance,

John

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Hall of Fame Community Legend

Per phone - Call authorization code

Hi John,

FAC Codes are "unique" and will not be common for all users So, lets  say John

has code 10112 and Rob has code 10525. The whole goal is that a  Long Distance

call placed by John (from any phone) will use code 10112  so the "charge-back"

can be billed accordingly. When Rob goes to place a  Long Distance call, he will

use his own personal code 10525 and again  the charges will be billed against his code.

We used to use Station Specific Auth Codes on our Nortel Meridian TDM

system. When we moved to CUCM we realised that this feature was not available.

We have not found this to be a big issue, as Auth Codes are generally used for

Billing restriction purposes. Because Toll calls are billed against the FAC code

when used, the overall functionality has basically remained the same.

Cheers!

Rob

"Why not help one another on the way" - Bob Marley

View solution in original post

3 REPLIES 3
Highlighted
Hall of Fame Community Legend

Per phone - Call authorization code

Hi John,

FAC Codes are "unique" and will not be common for all users So, lets  say John

has code 10112 and Rob has code 10525. The whole goal is that a  Long Distance

call placed by John (from any phone) will use code 10112  so the "charge-back"

can be billed accordingly. When Rob goes to place a  Long Distance call, he will

use his own personal code 10525 and again  the charges will be billed against his code.

We used to use Station Specific Auth Codes on our Nortel Meridian TDM

system. When we moved to CUCM we realised that this feature was not available.

We have not found this to be a big issue, as Auth Codes are generally used for

Billing restriction purposes. Because Toll calls are billed against the FAC code

when used, the overall functionality has basically remained the same.

Cheers!

Rob

"Why not help one another on the way" - Bob Marley

View solution in original post

Highlighted
Beginner

Per phone - Call authorization code

Hi Rob,

Thanks for your answer !

In fact, I will implement the FAC for phones where are many users and only authorized users will have a code...

Thanks,

John.

Highlighted
Hall of Fame Community Legend

Per phone - Call authorization code

Hi John,

You are most welcome my friend

Cheers!

Rob

"Why not help one another on the way" - Bob Marley