cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
338
Views
0
Helpful
1
Replies
Highlighted
Beginner

RTMT not showing correct available HW Conference Resources

Hi,

 Our CUCM is running on version 11.5.1.15900-18 and Cisco gateway on XE software version 16.6.5.

  On the Cisco gateway we have configured hardware conference of max participants 16 and max session 32. This gives us max stream of 512. 

 However, on RTMT it is only showing 240 instead of 512. 

  Is this a bug or is CUCM only recognizing max 240 stream?

 

Regards

Daniel

1 REPLY 1
Highlighted
VIP Collaborator

As far as I know (and I checked the documentation, too) there is no 240 limit on threads available on the hardware conference bridge counters in RTMT.

RTMT reflects what CUCM knows. When the hardware conference bridge registers with CUCM one of the pieces of information that the bridge provides is its capacity. It is possible that the bridge is reporting the wrong information.

I suggest pulling the trace file for the Cisco CallManager service that covers a registration of this conference resource and looking for the capacity as reported by the resource. You'll be looking for lines related to the Media Resource Manager (MRM). If you post the trace, I can help you parse it for this information.

Maren